Accessories

Smith's Pocket Pal Knife Sharpener quickly sets your edge with carbide blades and the ceramic stones give you a razor sharp blade. The folding tapered diamond rod sharpens serrated edges and gut hooks. Carbide blades and ceramic stones are replaceable. Includes lanyard hole.

Super Tough Gravel Guards

Waterproof and comfortable the SUPERTough gravel guards keep gravel and grit out of your boots.

The Hunters Element Bino Harness is the most functional binocular harness system available. With "one size fits all" the Focus is capable of accommodating all binocular shapes and sizes and can be adjusted to create the desired fit. It holds your binos tight to your chest and is designed for quiet one handed use.

Our Tikka T3 scope mount rail is made specific to the gun, and will also work with Tikka T3 Lite and T3X Rifles. The T3X rifle has an extra hole in the receiver that our rail covers up and does not use.

Our Tikka T3 mount is provided with standard 6-48 screws, as Tikkas produced after 2004 are drilled at tapped for 6-48 screws. 

Mounting Hardware is Included

This Mount Fits:
T3 Hunter, T3 Laminated Stainless, T3 Varmint, T3 Super Varmint, T3 Varmint Stainless
T3 Compact Tactical, T3x Superlite Camo, T3x Superlite, T3x Compact, T3x Lite
T3x Lite Stainless, T3x Compact Tactical Rifle, T3x Varmint, T3x Laminated Stainless
T3x Forest, T3x Hunter Stainless, T3x Hunter

Mk2 suppressors are slightly smaller in diameter (43mm), extend 10mm less forward of the muzzle (95mm) and come back 120mm over the barrel.

Over barrel suppressor
Duralium, bead blasted and hardcoat anodized matte black

This configuration has 4 baffle modules (equivalent to 5 baffles on the muzzle forward can) making it perfect for anything with a case capacity no larger than a 30-06.

You have ten baffle options 20 cal, 22 cal, 6mm, 25cal-6.5mm, 7mm, 30 cal, 338 cal, 35cal, 44cal, 45cal

223, 7.62x39, 22-250, 243, 25-06, 308, 270, 30-06

Only takes minutes to disassemble and clean.

43.0mm diameter
215mm total length

95mm forward of the muzzle

285grams

A lot of research and time has been put into designing these baffles, they are extremely effective for the size and weight.

Barrel isolator tube will accept barrels no bigger than 22.5mm in diameter.

Additional baffles can be purchased for $45 each, they are 25grams in weight and add 15mm to the total length of the suppressor.

These suppressors are to order. We can also get DPT to thread your rifle for an additional $85.00. Just drop your rifle off to us.

The STEALTH 40 has the volume needed to make maximum suppression for most calibres, and the aircraft aluminium body keeps weight to a minimum which makes it ideal for NZ conditions.

Features:

• Aircraft aluminium body
• Stainless steel core and recoil damper
• Length 225 mm
• Weight 328g (calibre dependant)

The STEALTH 40 has the volume needed to make maximum suppression for most calibres, and the aircraft aluminium body keeps weight to a minimum which makes it ideal for NZ conditions.

Features:

• Aircraft aluminium body
• Stainless steel core and recoil damper
• Length 225 mm
• Weight 328g (calibre dependant)
• Forward distance - 120mm (critical for maximum performance)

This canvas pouch is modeled after the New Zealand Forest Service standard deer cullers issue and sits on the hip beside you knife. Great for housing your lighter, pull through, basic first aid, a few rounds of spare ammo in the shell loops and other necessaries, for a day on the hill or a night if you get caught out. The Large Canvas Pouch is 9" long, 5" high and 3" thick.

TRITON 50S II is the choice for you who want to reduce noise, recoil and muzzle flash to a minimum and still want the TRITON advantages with extreme durability and low weight.

This silencer is best suited for the stand hunter or for the hunter using calibers from .308 and up to Magnums, where the TRITON 50S II delivers a feeling that simply has to be experienced!

TECHNICAL SPECS

Caliber:  6.7mm

Thread: 5/8x24

Total length: 264mm

Addition to barrel length: 159mm

Diameter: 49mm

Max barrel diameter: 23.5mm

Weight: 499g

Material:

Inner components “ stainless steel

Outer components “ Aluminum with Soft Touch surface

Noise level at ear: 129dB (.308)

Warranty: 5 year

Misc: TRITON 50S is suitable from .308Win and up to 300WinMag and similar. For the most powerful calibres such as .338 Lapua Magnum, .378 Weatherby Magnum etc. we recommend TRITON 56S II.

The STEALTH 40 has the volume needed to make maximum suppression for most calibres, and the aircraft aluminium body keeps weight to a minimum which makes it ideal for NZ conditions.

Available in various thread options, modular system, stainless inner components, diam 40mmx 225mm long, weight 320gm.

Key features:

• Aircraft aluminium body
• Stainless steel core and recoil damper
• Length 225 mm
• Weight 328g (calibre dependant)
• Forward distance - 120mm (critical for maximum performance)

The STEALTH 40 has the volume needed to make maximum suppression for most calibres, and the aircraft aluminium body keeps weight to a minimum which makes it ideal for our conditions

Key features:

• Aircraft aluminium body
• Stainless steel core and recoil damper
• Length 225 mm
• Weight 328g (calibre dependant) 
• Forward distance - 120mm (critical for maximum performance)

Suitable for the following calibres with M14x1 metric thread:

• STEALTH40 6mm Max .222 - .243
• STEALTH40 7mm Max 7mm - .270
• STEALTH40 8mm Max .308 - 30-06

DPT is proud to release the new range of modular suppressors.

100% aluminium, bead blasted and anodized matte black.

You can’t go wrong with having extra magazines, whether it’s for quick loading times at the range or in the field. Or, as a backup in case you lose one or drop one in the mud.

Manufactured from blued steel this is a genuine factory replacement part.

Machined from 7075 aluminium billet with a hard-anodised black finish and supplied with three synthetic plates to suit different stock profiles, the Classic Rifle Adapter fits most traditional hunting rifles. Weighing just 20g including the screw and plate, and designed to fit Javelin bipods

Spartan Javelin bipods are constructed from Carbon Fiber and milled 7075 aerospace Aluminium with our patented magnetic attachment system. Only one bipod is required for all your rifles.

By using high-grade carbon fibre, the Javelin Lite weighs just 130 to 135 grams and does not compromise the balance of a rifle, making it perfect for hunters on the move, especially as it can be attached and detached in an instant using the Spartan Magnetic Attachment System

Olive the comfortable and effective hearing protection features you need. Hearing is a vital asset we often take for granted until it's been damaged significantly. Don't take your hearing for granted - protect it with a Buckmark II Hearing Protector.

The Buckmark II is a comfortable set of ear muffs with foam cups and a padded headband to make sure they are comfortable to wear with eye protection for extended periods of time at the range. With an noise reduction rating of 26 dB and built to conform with ANSI S3.19 noise reduction standards you know you're getting effective ear protection that is comfortable and high quality.

WINCHESTER CABLE LOCK 15" HARDENED

Spare mag for Thompson Centre long action rifles. Ideal for 270 and 30-06.

Nylon carrying pouch and 4" Medium Arkansas Sharpening Stone

Smith's 2-Stone Sharpening Kit includes a 5" Medium Stone used to set the edge on your knife or tool and a 4 Fine Arkansas Stone used to put the final polished edge on your knife or tool. The Medium Stone comes mounted on a sturdy molded plastic base that features a built-in stone storage area in the bottom for the Fine Arkansas Stone. A bottle of Premium Honing Solution and a sharpening angle guide are also included.

Nikwax Tech Wash is the market leader; it has been specifically designed and optimised for breathable waterproof fabrics. Nikwax Tech Wash is a highly effective cleaner. Additionally it will revitalise existing Durable Water Repellency (DWR) and revive breathability. It is the safe way to thoroughly clean your waterproof clothing and equipment. Application in a washing machine is quick easy and ensures that the whole garment is thoroughly cleaned.

Large bipod that easily attaches and detaches to the rifle fore-end. Folds forward when not in use.

Quick manoeuvring

Adjusts between 13" - 23" rapidly thanks to its spring-loaded legs. Swivel model has 18 degrees of tilt in either direction available without repositioning legs.

Excellent stability for a better shot

The bipod pivots independently from the upper stock mount allowing fast but sturdy levelling on uneven ground. The tension knob on the swivel model can also be adjusted to resist pivotal motion.

Robust construction

Aluminium and glass-filled polymers makes the bipod virtually weatherproof and rustproof.


- Fits QD swivel stud

- Spring loaded extendable legs

- Extremely stable. Legs unfold to a 56 degrees angle

- Quickly detachable

- Weight 450g

Bipod Adapter for picatinny rail

Attaches securely to any Picatinny rail
Swivel stud & surface contour for mounting bipod
Durable anodized aluminum construction

Guerrilla P51 slingshot - Green

Buffalo river bipod, attaches directly too sling stud on rifle. Perfect for creating a stable rest for taking longer shots in the field!

The Allen buttstock 9 cartridge holder is a black elastic holder that stretches to fit most rifles.

The Allen buttstock cartridge holder is a black elastic holder that stretches to fit most shotguns.

Holds five shells